Dell UP3214Q Review
by Chris Heinonen on April 1, 2014 12:00 AM ESTLast year I spent time with one of the first UltraHD monitors to be come out and came away convinced of the benefits. Even though the screen size was not much larger than my usual display, the extra clarity and detail was totally worth it. It sealed my decision to buy a MacBook Pro Retina when it was updated last fall as well. Now we’ve seen the field of UltraHD displays expand considerably and so we now look at another 32” UltraHD display, the Dell UP3214Q.
The Dell UP3214Q is very similar to the ASUS PQ321Q that I looked at last year. Both are 32” and both feature a 3840x2160 resolution. They are also both saddled with one of the current UltraHD weaknesses: a requirement that you have DisplayPort 1.2 MST support to get 60 Hz refresh rates. However, the Dell UP3214Q does have a few higher-end features that the ASUS lacks to help set it apart.
The first feature is that it supports the full AdobeRGB color gamut and not the more limited sRGB gamut. Since these initial UltraHD monitors are expensive and more likely to be used by professionals than home users, this support can go a long way. Second it has built-in support for Dell’s calibration software that lets you set two presets to be whatever settings you desire. If you have day and night settings, or different settings for online vs. print, this can be accomplished.
It also offers a larger selection of inputs than the ASUS model. With HDMI 1.4, DisplayPort, and MiniDisplayPort options you can connect it to two 60Hz UltraHD sources at once instead of just a single PC. This is most useful for those that wish to use it with a laptop as well as a desktop. Like many of the upper-end Dell displays it also features a 4-port USB 3.0 hub as well as a media card reader on the side. Unfortunately all of the USB 3.0 ports are hard to access on the rear instead of placing a pair on the side. I swap out my monitors more than 99.9% of the population but I hate having the USB ports being so hard to access.
The updated Dell design features a metal trim around the border which gives it a modern, semi-industrial look and also seems to work as a way to dissipate heat. I found this out as trying to adjust the monitor from the top after it has been on for a few hours can cause it to get quite warm. An IR temperature gun gave me readings of almost 130F. I’ve had monitors get warm to the touch before but the Dell UP3214Q is certainly the hottest so far, and that's quite surprising considering it uses LED backlighting. The stand that the Dell includes is also a new industrial design but still includes height adjustment, tilt, swivel and a way to route cables. There is no pivot so if you want to use your 32” UltraHD display in Portrait mode you’ll need to use the 100mm VESA mounts with a different stand.
Dell also has their on-screen menu system that I still think is the best in the business. They’ve made an unfortunate move to touch-sensitive buttons but the overall user interface is still the same. From an ergonomics perspective the Dell is an overall winner. I’d like to see them find a way to side-mount the inputs so they are easier to access, and move a couple USB ports around, but overall it is good.
Viewing angles, as an IPS display, are fantastic. I’d be hesitant about a TN panel of this size because off-angle issues could arise far too easily but it is not a problem with the Dell. With specs, ergonomics, and the on-screen display of the Dell UP3214Q there is not much that I find issue with...well, other than a high price, but that's expected.
Dell UP3214Q | |
Video Inputs | HDMI 1.4a, DisplayPort, Mini DisplayPort |
Panel Type | IGZO IPS |
Pixel Pitch | 0.182mm |
Colors | 1.07 Billion |
Brightness | 350 cd/m2 |
Contrast Ratio | 1000:1 |
Response Time | 8ms GtG |
Viewable Size | 32" |
Resolution | 3840x2160 |
Viewing Angle (H/V) | 176 / 176 |
Backlight | LED |
Power Consumption (operation) | 100W Typical, 170W Max |
Power Consumption (standby) | 1.2W Typical |
Screen Treatment | Anti-Glare |
Height-Adjustable | Yes, 3.5" |
Tilt | Yes |
Pivot | No |
Swivel | Yes |
VESA Wall Mounting | Yes, 100mm |
Dimensions w/ Base (WxHxD) | 29.5" x 19" x 8.4" |
Weight | 20.3 lbs. |
Additional Features | 4 port USB 3.0 hub, card reader |
Limited Warranty | 3 years |
Accessories | MiniDP to DP Cable, USB 3.0 cable, power cord |
Price | $3,499 (Currently $2800) |
84 Comments
View All Comments
Death666Angel - Tuesday, April 1, 2014 - link
On the topic of HiDPI and scaling: I have a 11.6" 1080p laptop (XE700T1C) and have no issue with it running at 125% and that is with using my finger most of the time (I only use the pen when I am already holding it because of note taking). 11.6"@1080p is 190 DPI, this is just 140. Unless you are using multiple monitors and suffer issues because of that, you need to get your eye sight fixed if you have having "high DPI" trouble with modern Windows .Bob-o - Tuesday, April 1, 2014 - link
Would love to see Anandtech evaluate all products on linux. . . at least a 1 paragraph "I tried it" kind of thing. . .houkouonchi - Friday, April 4, 2014 - link
I tested this monitor on linux. Works better on linux than all the rest because of the MST BS. On linux you just set it in a config file and never have problems and you don't have to worry about drivers 'dancing' their way around the problem. Not only that only on linux allows both GPU and monitor scaling of all resolutions while the display is in MST mode. People can't get scaling working at all on this on windows when the display is in MST mode.https://www.youtube.com/watch?v=f8oPyKDriiQ
lord solar macharius - Tuesday, April 1, 2014 - link
Just FYI - these issues have all know since the monitor went on sale last December. Dell's stance currently is if you want one with a fixed firmware you have to give up your new monitor and accept a refurbished replacement.http://en.community.dell.com/support-forums/periph...
Darrenn - Tuesday, April 1, 2014 - link
170 watts power usage! Are you kidding me? Typical 32 inch led monitors use around 30 watts. Somebody had to tell manufacturers that power usage is supposed to go down not increase by a factor of almost six.MrSmartyAss - Tuesday, April 1, 2014 - link
Hey, it's still April's fools day... that price is a grotesque joke. Just save your hard earned $$$ for the Vizio P-series and forget that DELL even offers this HDMI 1.4 embarrassment of an UHD monitor.AnnonymousCoward - Tuesday, April 1, 2014 - link
Ok seriously. The picture on anandtech.com is stretched, to give the screen an aspect ratio of 2.24! But no, this isn't a 21:9 screen.dgingeri - Wednesday, April 2, 2014 - link
"Sure, you can run a desktop at full resolution with no scaling but that is almost impossible for anyone to actually use."I use a 27" WQHD (2560X1440) monitor without any scaling, and it works beautifully. That's ~109DPI. It's not that much harder for a 32" UltraHD monitor to do the same. The DPI for that monitor calculates out to about 137DPI. I don't agree that it would be "almost impossible for anyone to actually use."
nquery - Wednesday, April 2, 2014 - link
The key is having good OS support for HiDPI. This is at least coming to OSX in 10.9.3.I have a 2013 retina MBP driving a Dell UP2414Q on 10.9.3. It works really really well. I have it set to 2x scaling most of the time ("Retina" in Apple parlance) and so have a super super crisp display for software development/text all day long. I don't game much but all apps work perfectly. It is like looking at a 24" recent smartphone, iPad. The only issue I have is that on occasion the display will not wake from sleep, but a quick cycle of the monitor power button resolves its and all windows return to where they were. Once Dell fixes the firmware for this I will likely exchange it. Otherwise the build quality and image is superb.
Before people chortle that it is waste to have an OS scale a 4k monitor to 1080p, remember that even though the effective resolution is 1080p for text with OS X scaling, the full 4k resolution is still available for use by imaging apps, games, etc. And sometimes I simple change the OS scaling to provide a 2560x1440 desktop if I need more 'real estate'. But my primary goal with HiDPI is to finally have crisp, sharp readable text on a big screen. 4k @ 32" is not about HiDPI, it's about desktop real estate. So it depends on what your needs are.
fyi, I was recently able to buy the 24" Dell Ultrasharp for < $1000 all in with some careful shopping. That's a few hundred more than the recently announced Samsung UD590 but it's far nicer IPS panel.
CalaverasGrande - Wednesday, April 2, 2014 - link
I don't know what is wrong at Dell. They never had the industrial design chops of Apple or IBM/Lenovo's products. But they were still head and shoulders above the other PC and display makers. The current Dell displays are just ugly. Not talking bout the picture quality, rather it's chassis and stand.Seriously, what is up with that hideous stand? There is not one angle that looks right on it. And the chassis with the silver and dark grey is very out of place on a $3k monitor.
The Lenovo UHD-4k designs are far more professional looking. Asus qhd/4k/uhd displays are also more pleasing in a Honda CRX kind of way.
Samsung and LG's professional offerings are similarly far less ugly.
I know it may sound trite, but hey, if I am sitting in front of it 40+ hours a week it matters.