A7 SoC Explained

I’m still surprised by the amount of confusion around Apple’s CPU cores, so that’s where I’ll start. I’ve already outlined how ARM’s business model works, but in short there are two basic types of licenses ARM will bestow upon its partners: processor and architecture. The former involves implementing an ARM designed CPU core, while the latter is the creation of an ARM ISA (Instruction Set Architecture) compatible CPU core.

NVIDIA and Samsung, up to this point, have gone the processor license route. They take ARM designed cores (e.g. Cortex A9, Cortex A15, Cortex A7) and integrate them into custom SoCs. In NVIDIA’s case the CPU cores are paired with NVIDIA’s own GPU, while Samsung licenses GPU designs from ARM and Imagination Technologies. Apple previously leveraged its ARM processor license as well. Until last year’s A6 SoC, all Apple SoCs leveraged CPU cores designed by and licensed from ARM.

With the A6 SoC however, Apple joined the ranks of Qualcomm with leveraging an ARM architecture license. At the heart of the A6 were a pair of Apple designed CPU cores that implemented the ARMv7-A ISA. I came to know these cores by their leaked codename: Swift.

At its introduction, Swift proved to be one of the best designs on the market. An excellent combination of performance and power consumption, the Swift based A6 SoC improved power efficiency over the previous Cortex A9 based design. Swift also proved to be competitive with the best from Qualcomm at the time. Since then however, Qualcomm has released two evolutions of its CPU core (Krait 300 and Krait 400), and pretty much regained performance leadership over Apple. Being on a yearly release cadence, this is Apple’s only attempt to take back the crown for the next 12 months.

Following tradition, Apple replaces its A6 SoC with a new generation: A7.

With only a week to test battery life, performance, wireless and cameras on two phones, in addition to actually using them as intended, there wasn’t a ton of time to go ridiculously deep into the new SoC’s architecture. Here’s what I’ve been able to piece together thus far.

First off, based on conversations with as many people in the know as possible, as well as just making an educated guess, it’s probably pretty safe to say that the A7 SoC is built on Samsung’s 28nm HK+MG process. It’s too early for 20nm at reasonable yields, and Apple isn’t ready to move some (not all) of its operations to TSMC.

The jump from 32nm to 28nm results in peak theoretical scaling of 76.5% (the same design on 28nm can be no smaller than 76.5% of the die area at 32nm). In reality, nothing ever scales perfectly so we’re probably talking about 80 - 85% tops. Either way that’s a good amount of room for new features.

At its launch event Apple officially announced both die size for the A7 (102mm^2) as well as transistor count (over 1 billion). Don’t underestimate the magnitude of both of these disclosures. The technical folks at Cupertino are clearly winning some battle to talk more about their designs and not less. We’re not yet at the point where I’m getting pretty diagrams and a deep dive, but it’s clear that Apple is beginning to open up more (and it’s awesome).

Apple has never previously disclosed transistor count. I also don’t know if this “over 1 billion” figure is based on a schematic or layout transistor count. The only additional detail I have is that Apple is claiming a near doubling of transistors compared to the A6. Looking at die sizes and taking into account scaling from the process node shift, there’s clearly a more fundamental change to the chip’s design. It is possible to optimize a design (and transistors) for area, which seems to be what has happened here.

The CPU cores are, once again, a custom design by Apple. These aren’t Cortex A57 derivatives (still too early for that), but rather some evolution of Apple’s own Swift architecture. I’ll dive into specifics of what I’ve been able to find in a moment. To answer the first question on everyone’s mind, I believe there are two of these cores on the A7. Before I explain how I arrived at this conclusion, let’s first talk about cores and clock speeds.

I always thought the transition from 2 to 4 cores happened quicker in mobile than I had expected. Thankfully there are some well threaded apps that have been able to take advantage of more than two cores and power gating keeps the negative impact of the additional cores down to a minimum. As we saw in our Moto X review however, two faster cores are still better for most uses than four cores running at lower frequencies. NVIDIA forced everyone’s hand in moving to 4 cores earlier than they would’ve liked, and now you pretty much can’t get away with shipping anything less than that in an Android handset. Even Motorola felt necessary to obfuscate core count with its X8 mobile computing system. Markets like China seem to also demand more cores over better ones, which is why we see such a proliferation of quad-core Cortex A5/A7 designs. Apple has traditionally been sensible in this regard, even dating back to core count decisions in its Macs. I remembering reviewing an old iMac and pitting it against a Dell XPS One at the time. This was in the pre-power gating/turbo days. Dell went the route of more cores, while Apple chose for fewer, faster ones. It also put the CPU savings into a better GPU. You can guess which system ended out ahead.

In such a thermally constrained environment, going quad-core only makes sense if you can properly power gate/turbo up when some cores are idle. I have yet to see any mobile SoC vendor (with the exception of Intel with Bay Trail) do this properly, so until we hit that point the optimal target is likely two cores. You only need to look back at the evolution of the PC to come to the same conclusion. Before the arrival of Nehalem and Lynnfield, you always had to make a tradeoff between fewer faster cores and more of them. Gaming systems (and most users) tended to opt for the former, while those doing heavy multitasking went with the latter. Once we got architectures with good turbo, the 2 vs 4 discussion became one of cost and nothing more. I expect we’ll follow the same path in mobile.

Then there’s the frequency discussion. Brian and I have long been hinting at the sort of ridiculous frequency/voltage combinations mobile SoC vendors have been shipping at for nothing more than marketing purposes. I remember ARM telling me the ideal target for a Cortex A15 core in a smartphone was 1.2GHz. Samsung’s Exynos 5410 stuck four Cortex A15s in a phone with a max clock of 1.6GHz. The 5420 increases that to 1.7GHz. The problem with frequency scaling alone is that it typically comes at the price of higher voltage. There’s a quadratic relationship between voltage and power consumption, so it’s quite possibly one of the worst ways to get more performance. Brian even tweeted an image showing the frequency/voltage curve for a high-end mobile SoC. Note the huge increase in voltage required to deliver what amounts to another 100MHz in frequency.

The combination of both of these things gives us a basis for why Apple settled on two Swift cores running at 1.3GHz in the A6, and it’s also why the A7 comes with two cores running at the same max frequency. Interestingly enough, this is the same max non-turbo frequency Intel settled at for Bay Trail. Given a faster process (and turbo), I would expect to see Apple push higher frequencies but without those things, remaining conservative makes sense. I verified frequency through a combination of reporting tools and benchmarks. While it’s possible that I’m wrong, everything I’ve run on the device (both public and not) points to a 1.3GHz max frequency.

Verifying core count is a bit easier. Many benchmarks report core count, I also have some internal tools that do the same - all agreed on the same 2 cores/2 threads conclusion. Geekbench 3 breaks out both single and multithreaded performance results. I checked with the developer to ensure that the number of threads isn’t hard coded. The benchmark queries the max number of logical CPUs before spawning that number of threads. Looking at the ratio of single to multithreaded performance on the iPhone 5s, it’s safe to say that we’re dealing with a dual-core part:

Geekbench 3 Single vs. Multithreaded Performance - Apple A7
  Integer FP
Single Threaded 1471 1339
Multi Threaded 2872 2659
A7 Advantage 1.97x 1.99x
Peak Theoretical 2C Advantage 2.00x 2.00x

Now the question is, what’s changed in these cores?


Introduction, Hardware & Cases After Swift Comes Cyclone
Comments Locked


View All Comments

  • robbie rob - Sunday, September 22, 2013 - link


    Not sure whats to be said. Samsung didn't design the A7, but unfortunately for ANY company in the USA its cheaper to have most things made in asia even though they aren't designed there. Samsung fabricates many types chips and ram in its plants that it doesn't necessarily design. Unfortunately for American's this is why may products like the Xbox are made in China.
  • Abhip30 - Tuesday, September 24, 2013 - link

    Samsung just makes them for apple.They are actually glorified foxconn. Apple provides them blueprints and samsung manufactures it. They just follow apple's instructions.
  • Origin64 - Monday, September 23, 2013 - link

    Still no HD-Ready resolution (in 2013, really?) but we have a fingerprint scanner. A shame it's hackable and fingerprints aren't safe in general, where just a few weeks ago I read about a new identification technique that made use of an infrared scan of blood vessels in your face. More unique, harder to copy. Not that that'd be good to have, the NSA will still get their fingers on those biometrics.
  • darkcrayon - Monday, September 23, 2013 - link

    Going to 720p on a 4" phone wouldn't make much difference.
  • robbie rob - Monday, September 23, 2013 - link

    Fingerprint technology is in its infancy in consumer products. Any hacking of the fingerprint scan helps Apple and the industry. Apple will be able to patch vulnerabilities found by the best of the best. My thoughts are.. Overall, no one wants my fingerprints or yours. For the millions of people out there who have an iPhone most aren't worth the work or time. To me that means I'm just fine using it to log into a phone or make a purchase on iTunes. The truth is it would be easier and more likely for someone to break into your bank account online. No one needs a fingerprint to do that.
  • Promptneutron - Monday, September 23, 2013 - link

    Another comprehensive, detailed but readable review. Anand, you produce (by some margin) the finest tech reviews on the web. Even my wife (who is a tech vacuum) read this and wants an iphone 5s..and she's not alone..;)...thank you and top work (again).
  • NerdT - Monday, September 23, 2013 - link

    All of these graphics performance comparisions (except the off-screen ones) are incorrect and absolutly miss-leading. The reason is that most of the other phones have a 1080p display which has 2.8x higher resolution that iPhone 5s! That being said, all on-screen scores will get bumped up by about the same scale for iPhone because they are calculated based on FPS only, and the frames are render the the device resolution. This is a wrong benchmarking because you are not having an apple to apple comparision. I would have expected a much higher quality report from Anandtech! Please go ahead and correct your report and prevent miss-leading information.
  • darkcrayon - Monday, September 23, 2013 - link

    As you even said, both onscreen and offscreen tests were shown, and the resolution difference was noted. They even have the iPhone 5 in the tests for the truest "apple to apple" comparison possible. I think you're grasping at straws here.
  • robbie rob - Monday, September 23, 2013 - link

    "off screen" resolutions FPS was shown ..
  • AEdouard - Monday, September 30, 2013 - link

    Hey NerdT. For a nerd, you sure don't know how to interpret charts. What do you think the offscreen tests are for? It's to eliminate the effect of display resolution. In those tests, the iPhone performed better, generally, then all other phones. The only processors that beat it where SOCs put inside tablets (where their performance can be increased).

    And beyond, that, isn't the main point to be able to see how the phone will perform in real life, which is why tests at the phone's resolution matter too.

Log in

Don't have an account? Sign up now