Intel has already started to sell low-power dual-core Core i5/i7 Kaby Lake microprocessors for notebooks, but desktop parts with four cores and high frequencies are due in early 2017, as Intel announced back at IDF and the Kaby Lake-Y/U launch. In advance of the desktop launch, as is typical with how CPUs are launched, Intel has to send out qualification and near-retail samples to partners for pre-testing of release systems. Typically this is kept under wraps, without official public announcements (it's up to you how many of the leaks you want to believe), but late last week Intel sent out a 'Product Change Notification' through its online/public channels, with details about a good portion (no way to tell if it is all the SKUs) of Intel's Core i7 and Core i5-7000 series parts.

Within the PCN, Intel notified its customers about an additional assembly/packaging site for its desktop Kaby Lake-S chips in Vietnam and therefore had to disclose model numbers of the CPUs as well as some of the specifications. In addition, in a separate PCN detailing package adjustments for how chipset ICs are shipped, it would seem that Intel has also mentioned names of its upcoming 200-series chipsets.

According to Intel’s document for partners, the company intends to release at least 11 quad-core processors for desktops based on the Kaby Lake microarchitecture in Q1. What is noteworthy is that the company wants its customers to get ready to receive the first shipments of the KBL-S chips assembled in Vietnam starting from November 4, 2016, this week (which means that the final specs of the new processors have been set and will only be changed in extreme circumstances). The initial KBL-S lineup would seem to include three Core i7 SKUs, seven Core i5 CPUs as well as one Xeon E3 v6 product. (The fact that a Xeon v6 is included in this is interesting, given that Intel removed standard chipset support for Xeon E3 CPUs with Skylake and v5, meaning that both consumer and enterprise platforms are due to land in January.)

All the Kaby Lake-S processors will use the B0 stepping of the core, and will have 100-300 MHz higher base frequency compared to their Skylake-S counterparts. The PCN does not explicitly state the TDP, however we do not expect much to change given the slightly improved 14+ nm technology and the increased frequencies (same thing applies to cache size, which has been consistent for several generations). We have already observed that mobile Kaby Lake CPUs have higher clock rates compared to their predecessors due to enhancements of Intel’s 14+ nm process technology, and we see that their desktop brethren also have improvements on this front. We do not have the final Turbo frequencies at hand, but we expect them to be considerably higher than the base clock rates.

Basic Specifications of Quad-Core Intel Core i5/i5 and Xeon E3
Kaby Lake-S Skylake-S
Model Cores
TDP Product
S-Spec Model Freq.
i7-7700K 4/8 4.2 GHz 95W CM8067702868535 SR33A i7-6700K 4.0GHz
i7-7700 3.6 GHz 65W CM8067702868314 SR338 i7-6700 3.4GHz
i7-7700T 2.9 GHz 35W CM8067702868416 SR339 i7-6700T 2.8GHz
i5-7600K 4/4 3.8 GHz 95W CM8067702868219 SR32V i5-6600K 3.5GHz
i5-7600 3.5 GHz 65W CM8067702868011 SR334 i5-6600 3.3GHz
i5-7600T 2.8 GHz 35W CM8067702868117 SR336 i5-6600T 2.7GHz
i5-7500 3.4 GHz 65W CM8067702868012 SR335 i5-6500 3.2GHz
i5-7500T 2.7 GHz 35W CM8067702868115 SR337 i5-6500T 2.5GHz
i5-7400 3.0 GHz 65W CM8067702867050 SR32W i5-6400 2.7GHz
i5-7400T 2.4 GHz 35W CM8067702867915 SR332 i5-6400T 2.2GHz
E3-1205v6 ?/? 3.0 GHz ? CM8067702871025 SR32D - -
Additional Info from Other Sources
i3-7300* 2/4 4.0 GHz 65W ? SR2MC i3-6300 3.8 GHz
Pentium G4620* 2/2 3.8 GHz 51W ? SR2HN Pentium G4520 3.6 GHz
Pentium G3950* 2/2 3.0 GHz 51W ? SR2MU Pentium G3920 2.9 GHz

*CPU details taken from this piece at PCOnline

Aside from the 14+ process offering higher frequencies, the base microarchitecture of Kaby Lake-S, as explained at the release of Kaby Lake-Y/U in September, is essentially the same as Skylake. However, on top of increasing the frequencies, Intel is also adding in Speed Shift v2 which allows for much quicker adjustments in CPU frequency over Skylake (down to 10ms rather than 30ms).

It remains to be seen is whether the new 14+ process technology will also enable considerably higher overclocking potential compared to existing CPUs. If it does, then the new chips have a chance to become rather popular among enthusiasts, potentially toppling the i7-2600K as a long term favorite.

It might be noted is that Intel’s Kaby Lake-S will have to compete not only against their predecessors, but also against AMD’s Zen products due in Q1. That being said, some would argue that given AMD's recent presentation of certain benchmark metrics, Zen is geared more towards the high-end desktop crowd. Nevertheless, it looks like early 2017 is going to be an interesting time for microprocessors.

200-Series Chipsets

In addition to model numbers of its Kaby Lake CPUs, Intel also revealed the names of its 200-series chipsets in another document it sent to partners. As expected, the lineup will include the Z270 PCH for enthusiast-class PCs with overclocking capabilities; Q270, H270 and H250 for mainstream systems and B250 for office/business computers. 

Intel 200-Series Chipsets
Name Socket Stepping Product Code S-Spec
Intel H270 LGA1151 A0 GL82H270 SR2WA
Intel Z270 GL82Z270 SR2WB
Intel B250 GL82B250 SR2WC
Intel Q250 GL82Q250 SR2WD
Intel Q270 GL82Q270 SR2WE
Intel C422 LGA1151? A0 GL82C422 SR2WG
Intel X299 ?!? A0 GL82X299 SR2Z2

Also in the list of chipsets were a couple of unknowns as well.

Listed in the PCN is C422, which because it has a 'C' in the name means that this is typically geared towards workstations and Xeon platforms. This may be in line with the E3-1205 v6 CPU SKU as seen in the processor list.

Also is X299, which really throws up a few question marks. The X-series chipsets are typically for Intel's High-End Desktop Platform (HEDT), and we've had X58, X79 and X99 in the last decade, from Nehalem up to Broadwell-E which was released back in May. This means either one of two things - either Intel is bringing the X nomenclature to Kaby Lake, the mainstream platform, or this is the next chipset for HEDT and the future Skylake-E series of processors. The first option in making X299 a Kaby Lake-related platform seems a little odd. However the second one, with Skylake-E, makes sense. After X99, the X119 name doesn't have the same marketability (if Intel was to keep parity with number jumps), but by pushing Skylake-E onto the 200-series naming as X299, it moves both mainstream and HEDT chipset naming strategies onto the same track. Note that we don't have a time-frame for Skylake-E as of yet.

Intel’s motherboard customers, given the Q1 launch, must be ready to receive the 200-series PCH ICs on new reels. According to the PCN, these will come with additional protections bands starting from December 2, 2016. Intel may or may not announce the whole 200-series (not X) lineup at CES, given this late in the day adjustment to core components for the motherboards. 

As for improvements of the Intel 200-series chipsets, we are still waiting on official confirmation as to exactly what to expect. Various unconfirmed leaks have indicated additional PCIe 3.0 chipset lanes, some new platform features and support for Intel’s Optane SSDs, however we will be here for the official launch when the time comes. It might be worth noting that almost all the motherboard manufacturers have now formally announced new 100-series BIOS support for Kaby Lake CPUs, meaning not all enthusiasts will have to get new motherboards.

Sources: Intel, PCOnline



View All Comments

  • ZeDestructor - Tuesday, November 1, 2016 - link

    If you really want your fluxless solder die-attach tech, then pony up for the big socket platform. Reply
  • BOMBOVA - Monday, October 31, 2016 - link

    Not real news, the fibs on this were coming out 3 months ago. unfortunate for power computer users. Reply
  • neblogai - Monday, October 31, 2016 - link

    Pentium G4620 is 2C/4T, isn't it? Most publications, including the chinese one linked here, says it is. It should be a very interesting chip, similar to i3 6100 and able to do well enough in gaming. Reply
  • Lolimaster - Monday, October 31, 2016 - link

    2cores are not enough these days for gaming, specially console ports. You maybe see high fps. but also see the game freezing from time to time when it can't access more cpu resources regardless of OC.

    Athlon X4 860K > any skylake i3 in the new tomb raider, less max fps but fluid experience, when the game is out of cpu resources the i3 will make the fps go to the low 20's + stuttering while the 860K maitain a minimum of 45-50fps.
  • BrokenCrayons - Monday, October 31, 2016 - link

    I have an 860K and I must respectfully disagree with you that it's a better alternative based on my experiences with it in the past few months. Mine is running on a Gigabyte A68H micro ATX board with 16GB of 2133 RAM and it replaced a Xeon 3065 (dual core 2.33GHz LGA775) with 4GB of DDR2 800. To say I'm underwhelmed is a serious understatement and it created so much heat over the summer that I shoved it out to my porch and now use it as a headless box to stream games to my laptop (which is almost never since the gaming experience on it is pretty lackluster). Reply
  • SquarePeg - Monday, October 31, 2016 - link

    I have an i3 6100 with a R9 380 and 8gb 2133 ddr4. I have noticed a few occasional dips in Rise of the Tomb Raider under DX11 but since they have gotten DX12 smoothed out frame rates have increased greatly. DX 12 on RotTR really gives a major boost to fluidity and frame rates when running on an i3 with AMD graphics.

    You can't overclock an 860K enough to bring it to parity with a Skylake i3 when it comes to gaming. A quick check over at cpuboss shows a crushing 58% advantage for the i3 in single core performance so the small SMT threads on the i3 aren't that much slower than a stock 860K thread.
  • vFunct - Monday, October 31, 2016 - link

    Which ones are likely to go into the next iMac? Reply
  • TheinsanegamerN - Monday, October 31, 2016 - link

    didn't you hear? Apple is going to make a "courageous" decision and use the A10X in the next iMAC. Reply
  • Lolimaster - Monday, October 31, 2016 - link

    AMD Raven Ridge APU is going to the iMACs next year. Reply
  • bill.rookard - Monday, October 31, 2016 - link

    The sleeper in that batch seems to me to be the i3-7300. Dual core with HT, and 4.0ghz base. If they ever released an unlocked multiplier version or at least allowed base clock adjustments (damn them for locking down the i3 Skylakes after the fact), they'd have a huge hit on their hands.

    I guess that's what happens with no competition. Let's hope for some AMD success in a few months. I can almost guarantee that they'll unlock their lower binned parts.

Log in

Don't have an account? Sign up now