As part of its CES 2021 announcements, Intel officially unveiled a number of NUCs based on their Tiger Lake SoCs. Intel's initial NUCs were all based on 100mm x 100mm (4in x 4in) boards, kickstarting the UCFF craze that contributed to revitalizing the PC market. Over the last few years, we have seen Intel expand the NUC to encompass multiple other form-factors, while keeping compactness in mind:

  • Performance: The original 4x4 UCFF units
  • Pro: 4x4 UCFF units with expansion support and vPro capabilities
  • Compute Elements: Add-in Card form factor with carrier boards for system design
  • Extreme: Compute Elements using a 45W TDP processor with a base board hosting up to three PCIe expansion slots (inclusive of a M.2 22110 NVMe slot) and a 5L chassis enabling compact gaming and workstation PCs
  • Rugged: NUCs designed for operation in industrial and factory-floor type environments, sporting processors based on the Atom microarchitecture
  • Essential: 4x4 NUCs sporting processors based on the Atom microarchitecture
  • Laptop Kit: Reference design / whitebook models for OEMs to bring notebooks to market faster
  • Enthusiast: Compact PCs with a 5.5in. x 8in. motherboard sporting a discrete GPU (either soldered or in-package)

The Panther Canyon NUCs are the Tiger Lake-based "Performance-class" units, with eleven different SKUs based on three different boards.

All the models operate the Tiger Lake processors (Core i7-1165G7, Core i5-1135G7, or the Core i3-1115G4) with a TDP of 28W. The K and H kits are the usual ones we have seen in previous generations - the latter has support for the installation of a 2.5" drive. Panther Canyon also has a Q SKU that adds a wireless charging lid (up to 15W) on top of the H chassis. The specifications are summarized in the table below.

Intel Panther Canyon NUC (Tiger Lake-U) Lineup
Model NUC11PA{K/H/Q}i3 NUC11PA{K/H/Q}i5 NUC11PA{K/H/Q}i7
CPU Intel Core i3-1115G4
2C/4T
1.7 - 4.1 GHz (3.0 GHz)
12 - 28 W (28W)
Intel Core i5-1135G7
4C/8T
0.9 - 4.2 GHz (2.4 GHz)
12 - 28 W (28W)
Intel Core i7-1165G7
4C/8T
1.2 - 4.7 GHz (2.8 GHz)
12 - 28 W (28W)
GPU Intel® UHD Graphics for 11th Gen Intel® Processors (48EU) @ 1.25 GHz Intel® Iris® Xe Graphics (80EU) @ 1.3 GHz Intel® Iris® Xe Graphics (96EU) @ 1.3 GHz
DRAM Two DDR4 SO-DIMM slots
Up to 64 GB of DDR4-3200 in dual-channel mode
Motherboard 4.13" x 4.16" UCFF
Storage SSD 1x M.2-2280 (PCIe 4.0 x4 (CPU-direct) or SATA III)
DFF 1 ×  SATA III Port (for 2.5" drive)
Card Slots Full-sized SDXC UHS-II
Wireless Intel Wi-Fi 6 AX201
2x2 802.11ax Wi-Fi + Bluetooth 5.1 module
Ethernet 1 × 2.5 GbE port (Intel I225-V)
USB Front 1 × USB 3.2 Gen 2 Type-A
1 x Thunderbolt 3 Type-C
Rear 2 × USB 3.2 Gen 2 Type-A
1 × Thunderbolt 3
Display Outputs 1 × HDMI 2.0b
1 x mini-DP 1.4a
2 × DisplayPort 1.4 (using Thunderbolt 3 Type-C ports)
Audio 1 × 3.5mm audio jack (Realtek)
PSU External (90W) External (120W)
Dimensions Length: 117 mm
Width: 112 mm
Height: 38mm (K), 51mm (H), 56mm (Q)
MSRP ? ? ?

Intel's technical product specifications provide additional details on the I/Os. We see the front and rear Thunderbolt ports (curiously, marketed as Thunderbolt 3 instead of Thunderbolt 4) are enabled directly from the TGL-U processor. Two display outputs (DP 1.4a) are also routed through these Thunderbolt ports within the processor itself.

Interestingly, a protocol converter is still needed on the board to convert the DP 1.4a display output to HDMI 2.0b. There is a PCIe 4.0 x4 lanes set for attaching a NVMe SSD. The high-speed I/O lanes are multiplexed with a SATA port allowing the installation of a M.2 SATA SSD in the same slot. The LAN port is enabled by the i225-V 2.5 Gbps controller, while the SDXC card slot on the side requires an additional SDXC bridge chip. The Wi-Fi 6 capabilities are enabled by the soldered Intel AX201 CNVi card.

Panther Canyon looks to be a solid upgrade over the Frost Canyon NUC despite the loss of a couple of cores (the Frost Canyon NUC was a hexa-core affair), thanks to the improved CPU microarchitecture and a host of system-level upgrades. On the latter front, we have an additional Thunderbolt port, a 2.5 Gbps LAN port (compared to the regular Gigabit port in the Frost Canyon NUC), ability to install a PCIe 4.0 NVMe SSD, and the ability to drive up to four 4Kp60 displays. Additionally, we also have some of the Panther Canyon SKUs sporting a 15W wireless charging lid.

Various reseller listings have come up for the Panther Canyon NUCs in Europe. However, Intel has not provided a concrete launch date or pricing details for any of the SKUs yet.

Source: Intel

POST A COMMENT

43 Comments

View All Comments

  • Deicidium369 - Thursday, January 21, 2021 - link

    Tiger Lake U and H are they only versions - there will not be a Xeon variant based on TGL

    Ice Lake SP is Sunny Cove
    Sapphire Rapids is Golden Cove which on the desktop is Alder Lake
    Reply
  • Deicidium369 - Thursday, January 21, 2021 - link

    That's a part of the NUC line - specifically the NUC Element for Xeon... and not aware of any Pentium or Core i3 that has ECC. ONLY the Xeon has ECC Reply
  • yeeeeman - Tuesday, January 19, 2021 - link

    Very very late...they need to skip rocket lake and go to alder lake directly. they need to freaking ramp up that 10nm Enhanced super fin and push it forward together with 7nm EUV and 5nm GAAFET. Hope Pat will shake things up and cause they have got amazingly complacent. Reply

Log in

Don't have an account? Sign up now